2K Eco Protect Oil is a fast-drying oil with a low VOC content, allowing your floor to be ready for use in just 8 hours. You have the option to use the oil with or without hardener, with the addition of hardener enhancing wearability and water resistance. For those who appreciate the appearance of oil but desire the benefits of a lacquered surface, 2K Eco Protect Oil can be combined with a lacquer. Opt for 2K Eco Protect Oil clear for a classic look or choose a coloured oil to add character to your space. However, if your wooden floor features ships decking strips, always use clear oil to prevent discoloration. Designed for both commercial and residential use, 2K Eco Protect Oil is suitable for untreated and machine-sanded wooden floors. Please note that this product is for professional use only. Directions for Use: Ensure the surface is clean, dry, and free from dust, wax, polish, and soap residues. Sand irregularities in the direction of the wood grains, finishing with sandpaper grit 100-120. Vacuum sanding dust. Divide larger areas into smaller sections, applying oil to each section within 30 minutes to prevent drying. Moistening the surface before oiling improves saturation and appearance. Use a damp cloth to ensure even wetting, allowing the floor to dry until no longer damp. Mix oil and hardener as recommended and apply one coat of oil. Alternatively, the oil can be used without hardener. Apply oil wet-in-wet in 30-minute sections, using a polishing machine with a white nylon scouring pad to spread the oil from wet to dry areas. Finish by removing excess oil with a clean, lint-free cloth. Areas where oil hasn't absorbed into the wood and is left to dry will discolour the surface. The treatment is complete when the surface exhibits a uniform gloss level. Allow the floor to dry for 6-8 hours before use. If lacquering afterward, allow 16-24 hours of drying time.
